TG0474 Portable Dental X-ray Machine and X-ray sensor

Control System

1. Microprocessor control system

2. The exposure time is automatically selected according to the tooth position and mode, the time range is: 0.1-2.0S, and the time adjustment meets the requirements of the international standard R’10 number system.

3. There are three mode selection switches, namely: child mode, adult mode and RVG (sensor) mode.

Instructions for use

1. Press the power switch button, the device will first self-check, if it encounters a fault, it will display the fault code, if there is no fault, it will enter the normal standby state.

2. Enter the normal standby state, first select the mode, then select the tooth area to be photographed, and set the exposure time according to different tooth positions.

3. Place the film or sensor and adjust the shooting distance and angle.

4. When the exposure button is pressed during shooting, the buzzer will prompt a "di" sound, and the screen will display "EXP--", and the "exposure indicator" will flash red and blue indirectly, which means the exposure is successful; Please keep the shooting angle unchanged before the buzzer stops. If an error code appears during the exposure process, please stop using it immediately and refer to the error code to find a solution.

5. After the exposure is completed, it will enter the standby protection state, the time is 3S, after 3S, it will return to the setting state of the last exposure; before this, all the buttons except the power switch are in the locked state.

6. After shooting, if you don't need to continue shooting, please turn off the power in time.

note:

Portable Dental X-ray Machine and X-ray sensor can be purchased separately, if you need both, please purchase at the same time. The sensor contains software for Windows, and the laptop is not in the scope of supply.